skip to Main Content

The Gyptec partition and wall systems consists of laminated plasterboards bolted to steel profiles. According to the envisaged final thickness and desired insulation characteristics the most suitable type of system to be employed can be chosen: simple with higher fire resistance, with or without insulation.

In areas of greater demand, more complex systems are used, with reinforced structure and double or triple boards.

Application:

Cover the ‘U’ Studs with acoustic tape and secure them to the floor and ceiling. Make sure they are aligned. Do likewise with the side ‘C’ Studs. Fit the intermediate ‘C’ Studs with the recommended spacing (400 or 600 mm). Attach the boards on one side of the wall with PM screws and apply the insulation. Screw the boards on the opposite side. If it is a dual board solution, secure with staggered joints.

Did you know that you can paste tiles and hang objects on Gyptec boards?

As Gyptec plasterboards may receive various types of finishing such as paint, wallpaper and tiles. In wet areas, we recommend the use of Water-Resistant Boards. To attach objects up to 15 kg to the Gyptec boards, simply use a suitable bushing for that purpose. Heavier objects, such as a closet, can be directly attached onto the metal profiles that are easily detectable with a magnet.

Examples of systems:

120 BA13A Partition

GDIV 120/600 [2x13A+70+2x13A] MW60

Solution for interior partition walls, comprising a structure with ‘U’ Studs 70 profiles and ‘C’ Studs 70 metal profiles, spaced every 600 mm, to which two layers of Gyptec BA13A (STANDARD) plasterboards are fixed on both exterior faces. Volcalis ALPHA mineral wool in the cavity space.

Thickness120 mm
Maximum height3,85 meters
Weight per m²35,1 kg/m²
Acoustic InsulationFire Resistance

Rw = 51 dB

Itecons reference test ACU228/10

EI 60

Validation by extension
TECNALIA 089777-001

220 BA13A Double Partition

GDIV 220/600 [2X13A+70+(30)+70+2X13A] MW2X60

Solution for interior partition walls, comprising two independent structures with ‘U’ Studs 70 profiles and ‘C’ Studs 70 metal profiles, spaced every 600 mm, to which two layers of Gyptec BA13A (STANDARD) plasterboards are fixed on both exterior faces. Volcalis ALPHA mineral wool in the cavity space.

Thickness220 mm
Maximum height3,20 meters
Weight per m²38,4 kg/m²
Acoustic InsulationFire Resistance

Rw = 67 dB

Itecons reference test ACU178/12

EI 60

Validation by extension
TECNALIA 089777-001

176 BA13A Double Partition

GDIV 176/600 [2X13A+48+(30-C)+48+2X13A] MW2X45

Solution for interior partition walls, comprising two independent structures with ‘U’ Studs 48 profiles and ‘C’ Studs 48 vertical metal profiles, spaced every 600 mm, to which two layers of Gyptec BA13A (STANDARD) plasterboards are fixed on both exterior faces. Link between structures. Volcalis ALPHA mineral wool in the cavity space.

Thickness176 mm
Maximum height5,30 meters
Weight per m²40,5 kg/m²
Acoustic InsulationFire Resistance

Rw = 59 dB

Itecons reference test ACU173/12

EI 60

Validation by extension
TECNALIA 089777-001

100 BA15F Partition

GDIV 100/600 [15F+70+15F] MW60

Solution for interior partition walls, comprising a structure with ‘U’ Studs 70 profiles and ‘C’ Studs 70 metal profiles, spaced every 600 mm, on which one layer of Gyptec BA15F (FIRE-RESISTANT) plasterboards are fixed on both sides. Volcalis ALPHA mineral wool in the cavity space.

Thickness100 mm
Maximum height3,20 meters
Weight per m²28,2 kg/m²
Acoustic InsulationFire Resistance

Rw = 45 dB

Itecons reference test ACU225/10

EI 60

Validation by extension
TECNALIA 074712-001

Partition 120 BA13Protect

GDIV 120/600 [2x13Protect+70+2x13Protect] MW60

Solution for interior partition walls, comprising a structure with ‘U’ Studs 70 profiles and ‘C’ Studs 70, spaced every 600 mm, to which two layers of Gyptec BA13Protect (PROTECT) plasterboards are fixed on both outer faces. Volcalis ALPHA mineral wool in the air space.

Thickness120 mm
Maximum height3,85 meters
Weight per m²55,7 kg/m²
Acoustic InsulationFire Resistance

Rw = 51 dB

Itecons reference test ACL 013/19

EI 180

Validation by extension
TECNALIA 074713-001

Partition 120 BA13Gold

GDIV 120/400 [2x13Gold+70+2x13Gold] MW60

Solution for interior partition walls, comprising a structure with ‘U’ Studs 70 profiles and ‘C’ Studs 70, spaced every 400 mm, to which two layers of Gyptec BA13Gold (GOLD) plasterboards are fixed on both outer faces. Volcalis ALPHA mineral wool in the air space.

Thickness120 mm
Maximum height4,25 meters
Weight per m²50,58 kg/m²
Acoustic InsulationFire Resistance

Rw = 51 dB

Itecons Value by approximation ACU 228/10

EI 120

Validation by extension
TECNALIA 102672-002

Partition 120 BA13F

GDIV 120/600 [2x13F+70+2x13F] MW60

Solution for interior partition walls, comprising a structure with ‘U’ Studs 70 profiles and ‘C’ Studs 70, spaced every 600 mm, to which two layers of Gyptec BA13F (FIRE-RESISTANT) plasterboards are fixed on both outer faces. Volcalis ALPHA mineral wool in the air space.

Thickness120 mm
Maximum height3,85 meters
Weight per m²45,20 kg/m²
Acoustic InsulationFire Resistance

Rw = 51 dB

Itecons Value by approximation ACU 228/10

EI 120

Validation by extension
TECNALIA 102672-002

Partition 165 BA13F

GDIV 165/600 [3x13F+90+3x13F] MW85

Solution for interior partition walls, comprising a structure with ‘U’ Studs 90 profiles and ‘C’ Studs 90, spaced every 600 mm, to which three layers of Gyptec BA13F (FIRE-RESISTANT) plasterboards are fixed on both outer faces. Volcalis ALPHA mineral wool in the air space.

Thickness165 mm
Maximum height5 meters
Weight per m²64,20 kg/m²
Acoustic InsulationFire Resistance

Rw = 51 dB

Itecons Value by approximation ACU 228/10

EI 120

Validation by extension
TECNALIA 102672-002
Back To Top