Gyptec provides all the profiles and accessories needed for dry construction.
“U” Channel
48 / 70 / 90
Raia profiles are horizontal “U” shaped profiles used in the construction of partition walls and in some cladding systems, to connect the upper and lower ends to the support.
“C” Stud
48 / 70 / 90
Montante profiles are vertical “C” profiles used in the construction of partition walls and in some cladding systems, which are applied between the raia profiles, whereby the distance between them depends on the type of solution being built, to which the plasterboard is screwed.
Omega Profile
66 / 72
The Omega profiles are used in the interior lining of walls or continuous ceilings, which are fixed directly to the support and allow the plasterboards to be screwed on the other side.
Ceiling Profile
45 / 60
Ceiling profiles are “C” shaped profiles used in the construction of continuous ceilings, with a distance between them depending on the type of solution being built, to which the plasterboard is screwed.
Hanging Rail (Toothed)
Hanging Rails are metallic pieces used to suspend the metallic structure of continuous ceilings.
Corner Profiles
28×28
Corner profiles are “L” shaped profiles used as perimeter profiles in the construction of continuous ceilings.
U30 profile
30×30
U30 profiles are “U” shaped profiles, used to make strips in walls where large thicknesses cannot be implemented.
Fins
Type Z / Double L / Completely Lacquered
Galvanised steel profile used as a decorative perimeter element in false ceilings.
Finishing profiles
Perforated L / Perforated J / Perforated Corner
Galvanised steel profiles, used to reinforce corners and protect plasterboard edges.
Support Clamps
Horizontal / Vertical
Fastening items for metal structure joints. Used to suspend the ceiling profile.
Suspensions
Omega / Omega 3D / Rail
Fastening items for timber frame joints. Used to suspend the ceiling profile.
Accessories
Splice / Pivot / Crosshead
Ceiling accessories.
Joint Tapes
Paper Tape / Armoured Tape / Adhesive Netting Tape
Joint tapes, usually made of paper, are used in the treatment of joints, in order to ensure the continuity of the set of gypsum boards in the solution.
Acoustic Tape
45 / 70 / 45 B AD / 70 B AD
Acoustic Tapes are used for insulation between the perimeter and the structures.
Screws
PM 25 – 35 – 45 – 55 – 70 / MM 9,5 – 25 – 35
Self-tapping screws for plasterboard-to-metal or metal-to-metal fixing.
Wall Plugs
Brass M6 / Tap-It 25 – 50 – 37 – 50
Brass wall plugs and Tap-It wall plugs with flat-headed nail for hammer-in expansion.
Expansion Wall Plugs
65
19 to 32 mm wall plugs for fixing light loads in plasterboard.
Rod
M6 Rod / Splice M6 Rod / M6 Nut
Threaded rod diameter 6, Threaded rod splice M6, Zinc-plated nut M6.
